Christy's™ Red Hot Vinyl™ solvents are also excellent for making repairs to nail holes, saw cuts or scarred areas (cigarette burns, etc.) on a fence or deck system. The areas should be clean, free of dirt, oil or grease before starting the repair. A sufficient quantity of Christy's™ Red Hot Vinyl™ should be applied to form a "bubble" on the repair area. The "bubble" may sag or be worked in with a small brush or Q-tip on a deck repair. Allow the "bubble" to cure.

 

There will be considerable shrinkage so a second or third application may be required to cover the burn. Allow the second or third applications to cure thoroughly. Once cured, a single-edge razor blade my be used to trim the surface. The areas can also be sanded. If the opening is too large, a stiff backing may be necessary to support the sealant. Red Hot Vinyl™ will not add to the structural strength of a product so extreme care must be taken when fusing two surfaces together.